What You Need to Know About Air Conditioning Installation

air conditioning installation

When you hire professionals to do the air conditioning installation, be sure to ask about the cost of the system. You will also want to ask about the heat exchanger and ductwork, and the energy efficiency rating. After all, you want the system to keep your home as cool and comfortable as possible. Check out https://airconditioningsouthwales.uk for more info. Listed below are the steps to complete the process:

Costs of air conditioning installation

The costs of air conditioning installation vary widely. You’ll have to pay anywhere from $1700 to $7,500 for your new central air conditioning unit, which includes ductwork. The cost of the actual unit varies widely, too, depending on the type of AC unit and how many units you need. In most cases, the cost of installing an AC unit depends on the size of the system and whether you have to install new ductwork or not.

The time it will take to install a central air conditioner is dependent on the size of the project. A typical installation can take anywhere from one to five days, but projects requiring extensive ductwork will take a little longer. You can also expect the costs of upgrading an AC unit to increase as well. However, keep in mind that these costs can vary wildly, and you should expect to be able to find a company that is willing to work within your budget.


There are several different types of ducts available. Flexible ductwork is a versatile option made from a metal wire coil and covered with a plastic sheet. Flexible ductwork is usually made of accordion-style plastic and is insulated with glass wool or polyethylene. Flexible ductwork typically has a lower R-value than rigid ductwork, which means it will use less space and be more effective.

The spine of an air conditioning system is its main trunk line. This line runs the entire length of the building and is attached to the HVAC unit. It also features a cap that prevents air from flowing in and out. Branch runs are attached to the main trunk line and lead to the pre-planned vents. The proper joints depend on the type of duct pipe and its shape. This means that there are different ways to install branch runs.

Heat exchanger

A heat exchanger is a device used in air conditioning installations to transfer heat from one air stream to another. The incoming air stream is cooler than the exhaust, so the heat exchanger helps recover the heat. Heat exchangers come in different shapes and sizes, but most commonly, the device is a single large wheel with fine threads. Depending on the type of heat exchanger, the system can also contain a recuperator. In this case, the heat exchanger is used in a heat-recovery ventilation system to move stuffy air out while pulling in fresh air from outside.

Tube diameter is an important factor in heat exchanger size. Smaller diameter means they can be compact and inexpensive, but smaller tube diameters make mechanical cleaning difficult. A larger tube diameter overcomes these problems. The choice of diameter depends on the type of fluid and space. Some heat exchangers are more efficient than others, while others are more expensive. A heat exchanger with a smaller diameter is cheaper than one with a larger diameter.

Energy-efficiency rating

If you’re looking to get a new air conditioner for your home, you’ll want to choose one that has an Energy Efficiency Ratio (EER) of 12.0 or higher. The EER is a measure of the cooling output of an air conditioner in British Thermal Units at a particular operating point. For example, a 15,000 BTU air conditioner that draws 1,500 watts has an EER of 10. Developed by the Air Conditioning and Refrigeration Institute in 1975, the EER rating is based on the operating conditions of an air conditioner at 95 degrees Fahrenheit, 80 degrees inside, and 50% relative humidity.

When purchasing an air conditioner, it is important to note that different types have different ratings. While one type may be more efficient than another, the ratings are not necessarily related to one another. For example, an 8.5-SEER air conditioner is less energy-efficient than a 12,000-BTU air conditioning system with 1,200 watts. In fact, a higher SEER rating indicates a more energy-efficient unit.

Refrigerant disposal

As a rule, refrigerant is disposed of in a safe and environmentally friendly manner. Before disposed, refrigerant must be removed from all air conditioners, refrigerators, and freezers. The U.S. Environmental Protection Agency prohibits intentional release of refrigerants into the atmosphere. This includes chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs).

When disposing of air conditioning units, technicians must recycle all of the parts before disposing of the refrigerant. As this chemical is hazardous to the environment, technicians must be licensed to perform reclamation. Fortunately, many parts of an HVAC system can be recycled, such as the metal coils. The next step is separating and sorting all of these materials. These activities require time and welding experience.